Brands

Items 145 to 151 of 151 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  • Voodoo Lab PPAV Output Splitter Adapter

    Voodoo Lab PPAV Output Splitter Adapter

    This splitter adapter cable divides one Pedal Power output to two pedals. The splitter has two 2.1mm jacks which will connect to any 2.1mm plug. The white stripe cable is ground lifted to eliminate ground loops.
    $6.00
  • VooDoo Lab PPBAT R

    VooDoo Lab PPBAT R

    R/A Battery Snap. Allows you to power your 9V battery effects that dont have an external power jack.
    $3.50
  • VooDoo Lab PPEH24 Reverse Polarity Voltage Doubler

    VooDoo Lab PPEH24 Reverse Polarity Voltage Doubler

    For pedals with higher voltage requirements, use this voltage doubling reverse (center positive) cable with a 2.5mm straight barrel end to combine two Pedal Power outputs to make 18V or 24V.
    $6.00
  • VooDoo Lab PPL6 R

    VooDoo Lab PPL6 R

    Red (tip) 2.5mm R/A Reverse Polarity. Designed to power the Line 6 DL4, MM4, FM4, DM4, and AM4 digital modeling pedals which require a reverse polarity cable, and a 5.5mm x 2.5mm end.
    $3.50
  • VooDoo Lab PPMIN R

    VooDoo Lab PPMIN R

    3.5mm Mini Plug R/A. This plug is commonly found on most older/vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat series), Klon Centaur, and (non-LED) Voodoo Lab pedals.
    $3.50
  • VooDoo Lab PPREV R

    VooDoo Lab PPREV R

    White (end, right angle) 2.1mm R/A Reverse Polarity. Designed for reverse polarity powered units.
    $3.50
  • VooDoo Lab PPY

    VooDoo Lab PPY

    Y Cable 2.1mm. Combines two Pedal Power outputs (both in standard 9V mode) to create 18V.
    $6.00

Items 145 to 151 of 151 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction