Blackheart BH100H Hothead

The Blackheart BH100H Hothead is a brand new head from the folks at Loud Technologies. Designed to provide 100 watts of tube power with a simple layout, your quest for the ultimate guitar head ends here.

The Blackheart BH100H Hothead has power options galore. Gone are the days when you buy a 10 head and just use it for big clubs. The BH100H is capable of running in class A or Class AB, and Pentode or Triode mode. This means you can run it anywhere from 100 watts Class AB Pentode all the way down to 30 watts Class A Triode and many points in between. How is that for versatility?

The Blackheart BH100H Hothead features dual channels. Channel 1 is for clean tones or overdriven blues. Channel 2 puts out creamy hot lead tones galore. An included footswitch allows you to choose between the two channels. The tube driven effects loop is great for adding your favorite effects in series or parallel. Pack all that fun into a chassis made of 15 ply, 18mm void-free plywood and you have a rig readuy to take on the road. Are you ready for the Blackheart BH100H Hothead ? There is one here waiting for you.

Blackheart BH100H Hothead features:

• 100 Watts, Class A or Class AB Operation
• Pentode/Triode Switch
• Power Output: Class AB – 100 Watts RMS in (Full Power) Pentode Mode, 50 Watts RMS in (Half Power) Triode Mode, Class A – 60 Watts RMS in (Full Power) Pentode Mode, 30W RMS in (Half Power) Triode Mode
• Preamp Tubes: 6 x 12AX7
• Power Tubes: 4 x EL34
• Two Channels: Channel 1 (LOUD) voiced for Crisp Cleans to Classic Rock and Heavy Blues tones (Drive, Level, Treble, Middle and Bass controls), Channel 2 (F'N LOUD) voiced to capture Classic Crunch to Sweet Overdriven Lead tones (Gain, Level, Treble, Middle and Bass controls)
• Master Controls (shared by both channels): Master Presence, Master Volume
• Effects Loop: Tube Driven, shared by both channels, can be operated in Series or Parallel Mode
• Effects Loop Bypass, which can also be used as a boost
• Solid State Rectifier
• DC Powered filaments (preamp) for solid, quiet operation
• 16 gauge, 1.5mm rugged chassis construction with folded and welded corners
• Outputs: 1 x 16 ohm jack, 2 x 8 ohm jacks, 2 x 4 ohm jacks
• Cabinet made of 15 ply, 18mm void-free plywood construction

Blackheart BH100H Hothead includes:

• Footswitch for Channel Selection and Effect Loop On/Off, with LEDs
• User’s Guide
• Blackheart Stickers
• UPC Cord

**Item Ships UPS Ground ONLY***