The Tonebone PZ-Pre Acoustic DI Box Preamp is
equipped with piezo acoustic input signal boosters to allow both add-on
instrument pickups and built-in, integral active preamps to be combined
for a more natural rendering. It is compact yet full featured, designed
for both studio and live performance.
The Tonebone PZ-Pre
instrument preamp begins with two inputs for two instruments, which can
be toggled using the toggle footswitch. If you want to use two pickups
on a single guitar, a unique Mix function is provided that converts the
two channels from "either-or" to both. There are separate level
controls for each input.
The tone shaping on the PZ-Pre
preamplifier is simple yet extremely musical. It features powerful bass
and high controls with a semi-parametric mid. This is supported with a
feedback eliminating notch filter with variable frequency sweep control
and choice of normal and extra deep notch filtering. To help eliminate
troublesome resonance, a dual slope low cut (high pass filter) is also
provided. An internal polarity reverse can also be engaged to help
eliminate run-away feedback.
To augment on-stage performance,
the PZ-Pre Direct Box Preamp is equipped with a combination power
booster and effects loop bus. This allows you to introduce an effect
such as a chorus, or boost the signal for soloing with a simple foot
stomp. A separate tuner out has also been provided along with a mute
footswitch for on-the-fly tuning.
To facilitate all kinds of
monitoring, the Radial PZ-Pre offers the most comprehensive output
array ever: A standard instrument amp output sends the instrument
signal to your personal amplifier. A pre-EQ balanced lo-Z balanced
output is used to route the flat, pre-equalized signal the signal to
the front of house mix position, while a second XLR out is post-EQ for
onstage monitoring and in-ear systems so that the musician can get the
sound he wants. XLR outputs are equipped with polarity reverse and
ground lift.
Like all Radial products, the PZ-Pre features
heavy-duty 14-gauge construction and is supported with a 3-year
transferable warranty. Comes equipped with an external 15VDC power
supply.
Radial Tonebone PZ-Pre Acoustic Direct Box Preamp Specifications:
- External 15VDC power supply
- Input impedance regular: 6.8 kOhm
- Input impedance piezo: 10 MOhm
- PZB boost level: 10dB
- Low cut roll-off pos-1: 75Hz
- Low cut roll-off pos-2: 220Hz
- Notch frequency range: 56Hz to 330Hz
- Notch Q setting-1: 8dB
- Notch Q setting-2: 15dB
- Low frequency type and spec: Shelving type +/- 12dB @ 75Hz corner freq
- Mid frequency range, type and spec: Parametric +/- 12dB 82Hz to 5.6Khz
- High frequency type and spec: Shelving type +/- 12dB @ 7.5Khz corner freq
- Boost level: 12dB
- Effects send & receive : -10dB, Send 1 kOhm, Return 15 kOhm
- Polarity Switch: 180 degrees (absolute phase reversal)
- Input-1: 1/4" unbalanced
- Input-2: 1/4" unbalanced
- Insert send & receive: Send 1 kOhm, Return 15 kOhm
- Output instrument: Hi-Z, coaxial, 1 kOhm
- Output Tuner: Hi-Z, coaxial 6.8 kOhm
- Pre-EQ: XLR male balanced mic level 600 ohms
- Post-EQ: XLR male balanced mic level 600 ohms
- Dimensions: 8" x 4-1/4" x 1-3/8" (203x108x35mm)
Radial Tonebone PZ-Pre Acoustic Direct Box Preamp Features:
- Piezo acoustic input signal boosters
- Designed for studio and live performance
- Unique Mix function
- 1 -gauge construction
- 3-year transferable warranty
|
|
Worldwide Shipping
